Basic TG138P Airbrush Foundation Kit
Basic Spraygun Set TG138P Hot sale 2015 New Fashion 0.8MM Cheap Airbrush for Starter or Beginner with 2 Plastic Jars.
2 – 5 days delivery
3 in stock
Product Name: Basic Spraygun Set TG138P airbrush foundation kit
The simplest single airbrush gun kit. Very suitable for the starters. Of course good for the professional artist as well. When the finger button is bushed down, color is sprayed at a pre-set rate. The rate is easy to change.
Feed Type: Suction
Nozzle Dia.: 0.8 mm
Body Length: 130mm
Control: Single Action Push-Button
Glass Jars Capacity: 20ml/90ml
Working Pressure: 15-50PSI
Regulator: 1/4″ (F) 5mm(M)
Intermediate cleaning: spray out the paint, dissolve/loosen residue using water and /or a suitable cleaning agent and brushes/cotton buds, spraying it out subsequent to this.
Thorough cleaning (prior to longer working breaks): a. Terminate the compressed air supply. Unscrew the end piece and needle securing nut; b. Pull out the needle and clean with a cloth and cleaning agent. Check the needle tip for deformation; c. Unscrew the needle cap and clean with a cotton bud; d. Remove the nozzle and push any paint residue carefully out of the interior with a fine brush or needle. Check the nozzle and seal for cracks or deformation; e. Insert the nozzle into the air head and screw into position. Press the lever down and insert the needle carefully up to the stop. Screw the needle securing nut and end piece into position.
Further maintenance instructions:
Never immerse the entire instrument in solvent. A little thinned oil should be applied accationally to the lever mechanism. Keep the needle tip and nozzle free of oil and grease, as this can influence the spraying characteristics. The needle, nozzle and seals are components subject to wear and should be replaced when necessary. Nozzle sets and flow cups are available in different sizes to facilitate conversion.