Nail airbrush GN137
Airbrush For Commercial Arts, Illustration, Photo Retouching, Hobby, and Crafts, Cosmetics, Models, Fingernail Painting, and General Airbrushing.
1 – 5 days delivery
4 in stock
Please Share Us...
Product Name: Nail airbrush machine for nails GN137 (Generic)
This Airbrush For Commercial Arts, Illustration, Photo Retouching, Hobby, and Crafts, Cosmetics, Models, Fingernail Painting, and General Airbrushing. Spraying Fine Lines. Internal mix and gravity feed cup gives you super fine results.
Feed Type: Gravity Feed
Nozzle Dia.: 0.3mm (modified to 0.2mm)
Body Length: 150mm
Control: Double action push button
Working Pressure: 15-50PSI
Cup Capacity: 2cc
Intermediate cleaning: spray out the paint, dissolve/loosen residue using water and /or a suitable cleaning agent and brushes/cotton buds, spraying it out subsequent to this.
Thorough cleaning (prior to longer working breaks): a. Terminate the compressed air supply. Unscrew the end piece and needle securing nut; b. Pull out the needle and clean with a cloth and cleaning agent. Check the needle tip for deformation; c. Unscrew the needle cap and clean with a cotton bud; d.Remove the nozzle and push any paint residue carefully out of the interior with a fine brush or needle. Check the nozzle and seal for cracks or deformation; e. Insert the nozzle into the air head and screw into position. Press the lever down and insert the needle carefully up to the stop. Screw the needle securing nut and end piece into position.
Further maintenance instructions:
Never immerse the entire instrument in solvent. A little thinned oil should be applied accationally to the lever mechanism. Keep the needle tip and nozzle free of oil and grease, as this can influence the spraying characteristics. The needle, nozzle and seals are components subject to wear and should be replaced when necessary. Nozzle sets and flow cups are available in different sizes to facilitate conversion.