Product Name: Tagore TG216-FD Cake Decoration
Smart Cake Airbursh set for food decorating. Portable; silent; oil-less.
Standard color: White body with green decorating strip.
Moisture Trap: AFE1000.
Other Airbrush and Compressor Available Color – Pink.
Mini TG216 Compressor:
1. Voltage: DC12V 50Hz/60Hz Adaptor Autovolts 110-220V
2. Current: Less Than 800MA Power: 9W
3. Pressure: 18PSI
4. Air output per min./litres: More Than 7L/min
5. Electric Cable: 2m
6. Weight: 0.65kg
7. Size: 122mm*96mm*67mm
8. Sound:Quiet, vibration free
TG135B Airbrush Gun:
1. Feed Type: Gravity
2. Nozzle Dia:0.4mm
3. Body Length:140mm
4. Working Pressure:5-30PSI
5. Control: Push-Button
6. Cup capacity: 2CC
7. Moisture trap: AEF1000
8. Port Size: G1/8”
1. Miniature in size.
2. The clear filter bowl allows a visual inspection of built up moisture and evacuated through a spring-loaded release valve w/t taking filter off the airbrush.
3. Comfortable in the hand.
Intermediate cleaning: spray out the paint, dissolve/loosen residue using water and /or a suitable cleaning agent and brushes/cotton buds, spraying it out subsequent to this.
Thorough cleaning (prior to longer working breaks): a. Terminate the compressed air supply. Unscrew the end piece and needle securing nut; b. Pull out the needle and clean with a cloth and cleaning agent. Check the needle tip for deformation; c. Unscrew the needle cap and clean with a cotton bud; d. Remove the nozzle and push any paint residue carefully out of the interior with a fine brush or needle. Check the nozzle and seal for cracks or deformation; e. Insert the nozzle into the air head and screw into position. Press the lever down and insert the needle carefully up to the stop. Screw the needle securing nut and end piece into position.
Further maintenance instructions: Never immerse the entire instrument in solvent. A little thinned oil should be applied accationally to the lever mechanism. Keep the needle tip and nozzle free of oil and grease, as this can influence the spraying characteristics. The needle, nozzle and seals are components subject to wear and should be replaced when necessary. Nozzle sets and flow cups are available in different sizes to facilitate conversion.